25 Teeth Sprocket 1/4" Pitch 10mm Bore Carbon Steel with Set Screws 10x10mm The hexagon end is chamfered

The hexagon end is chamfered to slide easily into the fastener

watertight

but it has good performance in the low temperature environment -40 ° C

Part Number:8662751

lathe and routing jigs

25 Teeth Sprocket 1/4" Pitch 10mm Bore Carbon Steel with Set Screws 10x10mm The hexagon end is chamferedFeatures: 1. Chain Sprockets are normally mounted in a fixed position on a fixed shaft. Round hole with 2pcs Set Screws at 90 degrees. The shaft can be fixed well, which is convenient to use. 2. The chain sprocket should not rotate at a greater speed than is allowable for drive sprockets of the same size. Every roller chain sprocket comes with strong teeth that can latch onto the chain. It is suggested that chain sprockets have at least three teeth in